Parkside PT360 - Manual (Page 38)

38
• Push the hot air deflector firmly on the hot air attachment. The mounted hot air deflector
can now be turned as required.
Hot air deflector (Fig. E)
The hot air deflector can be used with the hot air attachment.
Use as blowing torch(Figure F)
Assembly
• Loosen the knurled nut (3)
• Remove the hot air/soldering attachment from the torch
• Fix the blow torch attachment with the help of the knurled nut on the device
• The device can now be used as a blow torch
CAUTION! Danger of burns! Never touch the heated
hot air deflector Allow the gas soldering iron to cool
completely before changing the attachments.
CAUTION! Danger of burns! Allow the gas soldering iron
to cool completely before changing the attachments.
Use as hot air gun
The hot air gun function is ideal for removing or drying paint and forming plastic. It can also
be used for shrink fitting and softening or removing adhesive.
• Detach the soldering tip from the hot air/soldering attachment
• The soldering gun can now be used as a hot air gun