beautypg.com

Parkside PSSA 3.6 C3 User Manual

Page 7

background image

7

GB

1) WORK AREA SAFETY

a) Keep work area clean and well

lit. Cluttered or dark areas invite ac-

cidents.

b) Do not operate power tools in

explosive atmospheres, such as

in the presence of flammable

Iiquids, gases or dust. Power tools

create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders

away while operating a power

tool. Distractions can cause you to

lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match

the outlet. Never modify the

plug in any way. Do not use

any adapter plugs with earthed

(grounded) power tools. Unmodi-

fied plugs and matching outlets will

reduce risk of electric shock.

b) Avoid body contact with

earthed or grounded surfaces,

such as pipes, radiators, ranges

and refrigerators. There is an

increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to

rain or wet conditions. Water

entering a power tool will increase the

risk of electric shock.

d) Do not abuse the cord. Never

use the cord for carrying, pulling

or unplugging the power tool.

Keep cord away from heat, oil,

sharp edges or moving parts.

Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool

Symbols on the unit

Before using for the first time, care-

fully read through the user manual.

Do not dispose of the device

with the battery installed in

household waste.

III

Protection class III

Symbols on the charger

Attention!

Read the manual.

The charger is for indoor use only.

Pole orientation

Protection class II

Electric devices do not belong with

domestic waste.

General safety instructions

for power tools

WARNING! Read all safety

directions and instructions.

Omissions in the compliance with

safety directions and instructions

can cause electrical shock, fire

and/or severe injuries.

Retain all safety directions and in-

structions for future use.

The term “Power Tools” used in the safety

instructions refers to mains-operated power

tools (with power cord) and to battery-op-

erated power tools (without power cord).

This manual is related to the following products: