Electrolux EBA 60000X - Manual (Page 11)

Hardness of water:
• Before filling up the water reservoir, make
sure that the decalcifying Brita filter has
been soaked in cold water for at least 30
min. Follow the instructions printed on the
filter package. After this operation insert the
filter into position inside the water reservoir
as shown in the figure.
• If the machine will not be used for long
periods, empy the water from tank.
• Brita filters are available from most
supermarkets and domestic goods outlest, a
our After-Sales Service Centres or at the
Shops of Authorized Spare Parts.
t
• Remove the reservoir and fill it with
approximately 2.5 litres of water as shown.
• replace the water reservoir in its own
housing tankig care to fully engage the
water valve into the docking station.
10/37