Parkside PSSA 18 A1 - Manual (Page 6)

6
GB IE
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further develop-
ment without notice. All dimensions, refer-
ences and information in this instruction
manual are therefore not guaranteed. Legal
claims made on the basis of the instruction
manual can therefore not be considered as
valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value de-
pending on the manner in which the
power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the op-
erating cycle are to be considered,
including, for example, times during
which the power tool is turned off
and times when the tool is turned on
but is running idle).
Notes on Safety
This section details the basic safety instruc-
tions for working with the appliance.
Symbols
Symbols on the Equipment
Caution!
Read through the instruction manual
carefully.
Wear eye protection.
Wear ear protection.
Wear breathing protection.
Wear cut-resistant gloves.
Keep other people away from the
device.
Keep hands away from the sawing
area.
Remove the battery from the device
before carrying out any work.
Electrical appliances must not be
disposed of with the domestic
waste.
Symbols on the battery
Do not dispose of bat-
teries in household
waste, fire or water.