Using the adapter set, Cleaning / care, Spare parts – Parkside PKZ 180 A1 User Manual

Page 31: Maintenance and service, Information about warranty and service processing

... / Cleaning / Care / Spare ... / Maintenance and ... /Information about ...

General safety information for electrical devices / Before use / Start-up

Using the adapter set

The adapter set allows the tyre filling device to be
used for the following additional applications:
a) Inflating balls using the ball needle

b) The valve adapter

allows bicycle tyres to be

inflated.

c) Inflating pools, air mattresses or dinghies using

the additional adapter

d) inflating items with screw valves (e.g. dinghies)

using the screw-on valve adapter

e) Deflating large-volume items. Use the deflating

valve adapter

for this purpose.

f) The two tapered universal adapters (

)

can also be used to inflate air mattresses.

Cleaning / Care

Note: We recommend cleaning the device imme-
diately after every use. Please first unplug from the
mains before cleaning.

Be sure the device is completely cooled off to
prevent burns.

Do not use cleaning agents or solvents for
cleaning.

Be sure water does not enter the device.

Depressurise the device before cleaning. To do
so, use the tyre filling device as a blow-out gun
and activate the trigger until no air escapes
anymore.

Note: Store the compressor in a dry and safe
environment. Bleed the device and any connected
air tools before storing.

Spare parts

Please contact our Service Department directly if
you are in need of spare parts.
www.cmc-creative.de
E-mail: [email protected]
Phone: +49 (0) 6894 9989752

Maintenance and Service

This device requires no maintenance.
Note: Never open the device. Any repairs must
be performed by our authorised service branch or
Customer Service.
Please note the following, if one of the errors below
occurs:

Disconnect the device from any power supply.

Allow the device to cool down and wait a
short period to neutralise residual energy.

Always verify the device is in safe working
condition.

Fault analysis
Fault

Solution

1. Compressor

doesn't start

1. Check the mains supply.

Check all cables, the fuse

and outlet are working.

2. Do not use extension ca-

bles which are too long.

3. Do not use the device in

ambient temperatures

below + 5 °C.

4. Avoid the motor overheat-

ing. Allow the motor to cool

down.

2. Insufficient

working pres-

sure

Check seals and the check

valve and have replaced, if

necessary

3. Tools aren't

working

Check hoses, quick-discon-

nect coupling and tools, and

have replaced if necessary

Information about warranty

and service processing

Creative Marketing Consulting GmbH
warranty

Dear customer, the warranty for this device is 3 years
from the date of purchase. In the event of product
defects, you have legal rights against the retailer of
this product. Your statutory rights are not limited in
any way by our warranty detailed below.

93472_Kompressor_PKZ_180_A1_content_LB2.indd 31

27.11.13 15:52