Parkside PEH 30 A1 - Manual (Page 16)

16 gB/MT
Introduction Introduction / general safety advice for electrical power tools
Electric planer PEH 30 A1
Q
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Q
Proper use
The device is suitable for planing wood in the form
of beams or boards or the like if the workpiece is
held securely in a fixed position. The device is also
suitable for chamfering edges and for rebating.
Any other use or modification to the device shall be
considered as improper use and could give rise to
considerable risk of accident. The manufacturer will
not accept liability for loss or damage arising from
improper use. not suitable for commercial use.
Q
Features and equipment
1 Safety lock-out
2 On / OFF switch
3 Planing debris removal port (right / left selectable)
4 Belt cover
5 Belt cover screws
6 guide fence
7 guide fence fixing screws
8 Fixing nut for setting rebate width
9 Sole
10 V-groove
11 Rebate depth stop fixing screw
12 Rebate depth stop
13 Rotary control for setting planing depth
14 Cutting depth scale
15 Reducer piece
16 Parking shoe
17 Blade shaft
18 Cutting element
19 Plane blade fixing screws
20 Plane blade
21 Side blade shaft guard
22 Allen key
23 Drive belt
24 Large belt wheel
25 Small belt wheel
26 Open spanner
Q
Included items
1 Electric planer PEH 30 A1
1 guide fence
1 Rebate depth stop
1 Allen key
1 Open spanner
1 Reducer piece
1 Operating instructions
Q
Technical data
Rated voltage: 230–240 V∼ 50 Hz
Rated power: 750 W
Design no-load speed: n
0
13000 rpm
Planing depth: 0–3.0 mm
Planing width: 82 mm
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in accor-
dance with En 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 89 dB(A)
Sound power level:
100 dB(A)
Uncertainty K: 3 dB
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration a
h
= 5.644 m / s 2
Uncertainty K = 1.5 m / s 2