Parkside PHLG 2000 B1 - Manual (Page 30)

30 GB/MT
General safety advice for electrical power tools Introduction / General safety advice for electrical power tools
Heat gun PHLG 2000 B1
For removing, reshaping, preheating,
defrosting etc.
Q Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Q Proper use
The heat gun is intended for the removal of paint,
for warming (e.g. heat-shrinkable sleeves) and for
reshaping and welding of plastics. It may also be
used for detaching glued connections and for de-
frosting or thawing water pipes. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
dangers. The manufacturer will not accept liability
for loss or damage arising from improper use. The
device is not intended for commercial use.
Q
Features and equipment
1 Air inlet
2 ON / OFF switch & temperature and
air volume regulator
3 Nozzle
4 Protector nozzle
5 Flat nozzle
6 Reducer nozzle
7 Barbecue lighting nozzle
Q Included items
1 Heat gun PHLG 2000 B1
1 Protector nozzle
1 Flat nozzle
1 Reducer nozzle
1 Barbecue lighting nozzle
1 Operating instructions
Q Technical information
Nominal voltage: 230 V∼ 50 Hz
Power consumption: max. 2000 W
Air volumes:
Setting I: ca. 300 l / min.
Setting II: ca. 500 l / min.
Temperatures
(Jet outlet nozzle): Setting I: ca. 350 °C
Setting II: ca. 550 °C
Protection class: II /
The sound pressure level (A) of the device is typically
less than 70 dB (A).
Q General safety advice for
electrical power tools
Read all the safety advice
and instructions! Failure to observe the safety
advice and instructions may result in electric shock,
fire and / or serious injury.
Keep all the safety advice and instructions
in a safe place for future reference!
The term “electrical tool” used in the safety advice
refers to electrical tools powered by mains electrici-
ty (by means of a mains lead) and electrical tools
powered by rechargeable batteries (without a
mains lead).