Parkside PNTS 1400 D1 - Manual (Page 12)

12
GB
Trouble shooting
Problem Possible cause Fault correction
Device does not start
Mains voltage is not
present
Check plug socket, cable,
line, plug and fuse, where
appropriate, repair through
electrical specialist
Defective on/off switch
( 6)
Repair by Customer Care
Worn carbon brushes
Defective motor
Low or lack of suction
Hose system ( 19) or jets
( 25/26) blocked
Remove obstructions and
blockages
Suction pipe ( 17)
assembled incorrectly
Assemble suction pipe correctly
Container ( 9) open Close container
Container ( 9) full Empty container
Filter ( 21/23/24) full
or clogged
Empty, clean or replace filter
Float in the filter basket
( 27) does not move
Release float
Float in the filter basket
( 27) faulty
Repair by Customer Care
Float does not switch
the appliance off
Float in the filter basket
( 27) does not move
Release float
Float in the filter basket
( 27) faulty
Repair by Customer Care