beautypg.com

Cleaning/maintenance, Storage, Disposal/environmental protection – Parkside PNTS 1400 D1 User Manual

Page 34: Gb mt

background image

34

GB MT

Cleaning/Maintenance

Pull out the mains plug.

Danger of electric shock.

Always check the appliance before

use for any obvious faults such as

a defective mains cable, and have

these repaired or replaced.

Cleaning the device

Never hose the device down with

water. Never use aggressive clean-

ing agents or solvents. This could

damage the appliance.

• After use, empty the stainless steel con-

tainer (

9):

- Opening the drain plug to allow the

vacuumed liquid to drain out (

10). A liquid residue remains in the

container.

To remove all residual liquids, fold

down the bow handle (1) and

take off the motor head (

3): fix

the bow handle with the locking

levers (14), hold the stainless steel

container (9) with one hand on the

bow handle and the other on the

bottom of the container and pour

out the residual liquid.

• Clean the waste tank with a damp

cloth.

• Wash the foam filter (

21) with luke-

warm water and soap, and allow to

dry.

• Beat the dust out of the fluted filter

(

23) and clean it with a paint brush

or hand brush.

• Replace the paper filter bag (

24)

when full (see “Spare parts/Accesso-

ries” for reordering)

• Knock the optional dry filter (fabric

bag) out. Where necessary, wash with

lukewarm water and soap, and allow to

dry.

Storage

1. Fold the handle (4) upwards.

2. Wind the mains lead (5) around

the handle (4).

3. Wind the suction hose (19)

around the handle (4). Both

mounts (16) fasten the suction

hose.

4. The accessory holders (13) are

used to store the telescopic suc-

tion pipe (17) and the nozzles

(25/26).

5. Store the appliance in a dry

place and out of reach of chil-

dren.

Disposal/Environmental

protection

Be environmentally friendly. Return the

tool, accessories and packaging to a recy-

cling centre when you have finished with

them.

Machines must not be disposed of

with household refuse.

Take the machine to a recycling point. The

waste plastic and metal parts can be sepa-

rated, accurately graded and passed on

for recycling. Contact our Service Centre

for more details. Defective units returned to

us will be disposed of for free.

This manual is related to the following products: