Parkside PSE 2800 B2 - Manual (Page 8)

8 GB
Safety Information
can vary from country to country. Nevertheless,
this information makes it possible for the user to
be able to make a better assessment of the
dangers and risks involved.
IMPOrTanT: Use only normal, unleaded
petrol as fuel.
read all the safety regulations and instruc-
tions. Any errors made in following the safety reg-
ulations and instructions may result in an electric
shock, fire and/or serious injury.
keep all safety regulations and instructions
in a safe place for future use.
layout (fig. a - M)
1 Tank indicator
2 Tank cover
3 2 x 230 V~ socket-outlets
4 Earth connection
5 Overload cut-out
6 Voltmeter
7 Oil filler screw
8 Oil drainage screw
9 Oil deficiency protection for low oil switch-off
10 On/Off switch
11 Choke lever
12 Reversing starter
13 Petrol cock
14 Wheels
15 Axle
16 Foot
17 Push bar holder
18 Push bar
19 Screws size M8 x 40
20 Screws size M8 x 16
21 Washers for wheels
22 Securing split pins for wheels
23 Nuts M8
24 Screwdriver
25 Spark plug wrench
Intended use
The device is designed for applications operated
with a 230 V alternating current source.
Be sure to observe the restrictions in the safety
instructions. The generator is intended to provide
electric power tools and light sources with electricity.
When using the device with household appliances,
please check their suitability in accordance with
the relevant manufacturer’s instructions. In case of
doubt, ask an authorized dealer of the respective
equipment.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
Technical data
Generator: Synchronous
Protection type: IP23M
Continuous rated power
Prated (S1):
2600 W
Maximum power Pmax
(S2 2 min):
2800 W
Rated voltage Urated: 2 x 230 V~
Rated current Irated: 11.3 A
Frequency Frated: 50 Hz
Drive engine design: 4-stroke, air-cooled
Displacement: 208 cm³
Fuel: Petrol
Tank capacity: 15 l
Engine oil: approx. 0.6 l
(15W40)
Safety Information / Before starting the equipment / Operation
85052_par_Stromerzeuger_Content_LB4_SI_CZ_SK.indd 8 20.11.12 11:16