Parkside PDSP 1000 A1 - Manual (Page 55)

55 GB
Safety advice Safety advice / operation
Take precautions to ensure that other people are not
contaminated (dust generation).
Ensure that the spent blast medium is trapped and
collected so that it can be disposed of in an environ-
mentally compatible manner.
Do not remove rating plates or labels–they are safety-relevant
parts of the device.
If you are inexperienced in the use of this type of device, you should
seek out information or training to learn how to handle it safely.
Q
operation
Q
Connecting the compressed air source
NoTE: operate the sandblasting gun 1 only with cleaned, conden-
sate- and oil-free compressed air and never exceed the maximum working
air pressure at the device of 8 bar.
NoTE: The compressed air source must be fitted with a (filter) / pressure
reducer so that the air pressure can be regulated.
Connect the sandblasting gun to a suitable compressed air source
by connecting the quick-release coupling of the air supply hose with
the plug-in nipple
3 to the sandblasting gun 1 . It locks itself in
place automatically.
Q
Filling the blast medium container
Always use a suitable blast medium for your sand blasting work.
NoTE: We recommend using a silica-free blast medium
(e.g. ground blast furnace slag) with a grading of 0.2 mm–0.8 mm.