beautypg.com

General safety advice for electrical power tools, Service, Safety advice relating to cordless drill drivers – Parkside PAS 3.6 B1 User Manual

Page 33: Original ancillaries / accessories, Before first use

background image

33

GB

General safety advice for electrical power tools / Before first use

by the manufacturer. Chargers are often
designed for a particular type of rechargeable
battery unit. There is the danger of fire if other
types of rechargeable battery units are used.

b)

Only the rechargeable battery units
supplied are to be used with an elec-
trical power tool.
The use of other recharge-
able battery units may lead to the danger of
injury or fire.

c)

When they are not being used, store
rechargeable battery units away from
paperclips, coins, keys. nails, screws
or other small metal objects that could
cause the contacts to be bridged.
Short-
circuiting the contacts of a rechargeable battery
unit may result in heat damage or fire.

d) Fluids may leak out of rechargeable

battery units if they are misused. If
this happens, avoid contact with the
fluid. If contact occurs, flush the af-
fected area with water. Seek addi-
tional medical help if any of the fluid
gets into your eyes.
Escaping battery fluid
may cause skin irritation or burns.

CAUTION! DANGER OF EXPLOSION!
The batteries must never be recharged!

6. Service

a)

Have your device repaired at the ser-
vice centre or by qualified specialist
personnel using original manufacturer
parts only.
This will ensure that your device
remains safe to use.

Q

Safety advice relating

to cordless drill drivers

Securely support the workpiece. A
workpiece held in a clamp or vice is kept more
securely in place than one held by your hand.

Hold the electrical power tool firmly.
High reaction torques may occur momentarily
during tightening or loosening of screws.

If the inserted tool jams, switch off
the electrical power tool immediately.

Be prepared for high reaction torques as they
may cause kickback.

The inserted tool may

strike concealed electricity cables,
therefore when working you must
hold the electrical power tool by the
insulated handle areas only.
Contact
with a live wire means that the metal parts of
the electrical power tools may become live and
this can result in an electric shock.

Before you carry out any tasks on the
device, transport or store it, make sure
that the direction of rotation switch is
in the middle position (lock).
To prevent
the device from starting up unintentionally.

Children or persons who lack the knowledge or
experience to use the device or whose physical,
sensory or intellectual capacities are limited
must never be allowed to use the device without
supervision or instruction by a person responsi-
ble for their safety. Children must never be
allowed to play with the device.

Q

Original ancillaries / accessories

Use only the ancillaries and accessories
that are detailed in the operating
instructions.
The use of ancillaries and ac-
cessories other than those recommended in the
operating instructions could lead to an increased
risk of personal injury for you.

Q

Before first use

Q

Charging the rechargeable

battery on the device

(see Fig. D)

For indoor use only!

Note: The battery is supplied partially charged.
Charge the battery for at least three hours before
first use. You can charge the Li-Ion battery at any

General safety advice for electrical power tools