Parkside PABS 10.8 C2 - Manual (Page 6)

6 GB/IE
Introduction
Cordless drill PABS 10.8 C2
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended purpose
This appliance is designed for drilling and screwing
into wood, plastic and metal. Use the appliance only
as described and only for the purposes indicated.
Any other uses, and modifications to the appliance,
are deemed to be improper usage and may result
in serious physical injury. The manufacturer accepts
no responsibility for damage(s) resulting from
improper usage. The appliance is not intended for
commercial use.
Equipment Components
1 Gear selector switch
2 Button for rechargeable battery LED
3 Rechargeable battery LED (status indication)
4 Direction of rotation switch/lock
5 ON / OFF switch
6 Soft-grip
7 Battery pack
8 Battery unlocking button
9 Light
10 Torque control / drill step
11 Quick-action drill chuck
12 Status LED red
13 Battery charge status indicator green
14 Fast charger
Items supplied
1 Cordless drill PABS 10.8 C2
1 Rechargeable battery pack PABS 10.8 C2-1
1 Fast charger PABS 10.8 C2-2
2 Bits (S2 PZ1, S2 PZ2)
1 Carry case
1 Directions for use
Technical Data
Cordless Drill PABS 10.8 C2:
Nominal voltage:
10.8 V
Idle-running speed: 1st gear: 0–400 min -1
2nd gear: 0–1300 min -1
Drill chuck
clamping range:
max. 10 mm
Maximum
drill diameter:
Steel:
8 mm
Wood: 20 mm
Battery pack PABS 10.8 C2-1:
Type: LITHIUM-ION
Nom. voltage:
10.8 V
Capacity: 1300 mAh
PABS 10.8 C2-2 Fast Charger:
INPUT
Nominal voltage:
230 V∼ 50 Hz
Nominal power: 27 W
OUTPUT
Nominal voltage:
12.6 V
Charging current 1500 mA
Charging time: approx. 60 min
Protection class: II /
Noise / vibration data:
Measured values for noise are determined in accord-
ance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 70 dB(A)
Sound power level:
81 dB(A)
Uncertainty K: 3 dB