beautypg.com

Start-up, Mt gb – Parkside PHD 150 A1 User Manual

Page 37

background image

37

MT

GB

13 Opening of cleaning agent tank

14 Quick�action

water supply connector

15 Cleaning agent tank

16 Accessories holder

17 Jet tube w/ high�pressure nozzle

18 Jet tube w/ flat spray nozzle

19 Rotating brush

20 Nozzle cleaning pin

21 Cleaning agent

22 Fork spanner

Functional description

The pressure washer uses high�pressure

water for cleaning.

A detergent can be added if this is re�

quired.

For the functions of the operating elements

please refer to the subsequent description.

Ensure that the safety instructions are al�

ways observed!

Scope of Delivery

Unpack the pressure washer and verify the

contents:

� Pressure washer with power supply

cable

� High�pressure hose on reel

� Cable hook

� Jet gun holder

� Quick�action

water supply connector

� Jet gun

� Jet tube w/ high�pressure nozzle

� Jet tube w/ flat spray nozzle

� Rotating brush

� Nozzle cleaning pin

� 0.5 l cleaning agent

� Fork spanner

Start-up

In keeping with current regulations

a pressure washer must never be

operated off the drinking water mains

supply without a controllable back�

flow preventer. A suitable backflow

preventer in conformity with EN

12729 type BA must be used.

Water that has passed through a backflow

preventer is classified as undrinkable.

A backflow preventer is available in spe�

cialist shops.

• Employ an ordinary garden hose for

the water intake and ensure sufficient

length.

• Use the device on a domestic water

supply or a water source with a feed

rate of at least 500l/h.

Setting up

• Slide the cable hook (5) and the jet

gun holder (11) onto the guides on the

device housing.

• Connect the high�pressure fitting (jet

gun) (12) to the jet gun (1). Use the

fork spanner from the package.

• Connect the quick�action water supply

connector (14) to the unit’s water sup�

ply port (9). Always use the filter insert

(8) and clean this as required.

• Plug in and turn the jet tube with high�

pressure nozzle (17) or the jet tube

with flat spray nozzle (18) or the rotat�

ing brush (19) to connect to the jet

gun (1).