Parkside PABS 10.8 A2 - Manual (Page 6)

6 GB
Introduction
Cordless drill PABS 10.8 A2
Q Introduction
Before you use it for the first time, it is es-
sential that you make yourself fully familiar
with the functions of the appliance and
find out how to correctly handle electrically powered
tools. Read the following directions for use as well as
the safety instructions. Keep these instructions. When
handing the device on to a third party, hand these
instructions on, too.
Q
Intended purpose
This appliance is designed for drilling and screwing
into wood, plastic and metal. Use the appliance only
as described and only for the purposes indicated.
Any other uses, and modifications to the appliance,
are deemed to be improper usage and may result
in serious physical injury. The manufacturer accepts
no responsibility for damage(s) resulting from
improper usage. The appliance is not intended for
commercial use.
Q
Equipment Components
1 Gear selector switch
2 Button for rechargeable battery LED
3 Rechargeable battery LED (status indication)
4 Bit garage
5 Direction of rotation switch/lock
6 On / Off switch
7 Soft-grip
8 Battery pack
9 Battery unlocking button
10 Light
11 Torque control / drill step
12 Quick-action drill chuck
13 Status LED red
14 Battery charge status indicator green
15 fast charger
Q Items supplied
1 Cordless drill PABS 10.8 A2
1 Rechargeable battery pack PABS 10.8 A2-1
1 fast charger PABS 10.8 A2-2
2 Bits in bit garage (S2 PZ1, S2 PZ2)
1 Carry case
1 Directions for use
Q
Technical Data
Cordless Drill PABS 10.8 A2:
nominal voltage:
10.8 V
Idle-running speed: 1st gear: 0–400 min -1
2nd gear: 0–1300 min -1
Drill chuck
clamping range:
max. 10 mm
The following icons / symbols are used in this instruction manual:
Read instruction manual!
Keep children away from electrical
power tools!
Observe caution and safety notes! for indoor use only!
Caution – electric shock!
Danger to life!
Check that the device, mains lead
and plug are in good condition!
Explosive material!