Parkside PAS 3.6 A1 - Manual (Page 31)

31 GB
Preparing the tool for use / Maintenance and cleaning / Service / Warranty
Anticlockwise:
Slide the direction of rotation switch 1 to the
right.
Press the ON / OFF switch 7 . The direction in-
dicator (anticlockwise) 4 illuminates. You can
now screw out the screws.
Lock:
Slide the direction of rotation switch 1 into
the middle position. The ON / OFF switch 7
is now locked.
Q Switching on / off the
LED lights
8
Switching on:
Press the ON / OFF switch (LED lights) 6 and
keep it pressed.
Switching off:
Release the ON / OFF switch (LED lights) 6 .
Q tips and tricks
Screw bits are designated with their dimensions
and their shape. If you are unsure, always try
the particular screw bit out to see whether it sits
in the screw head without any free play.
Q
Maintenance and cleaning
DAnGEr oF ELECtrIC
SHoCK! Pull the Battery charger 10 out of the
mains socket before carrying out any cleaning
of the device.
The cordless screwdriver is maintenance-free.
Always keep the device clean, dry and free of
oil or grease.
Do not allow any liquids to enter the device.
Use a cloth to clean the housing. Never use
petrol, solvents or cleaning agents that might
attack plastic.
Q Service
Have your device
repaired at the service centre or by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to use.
If the plug or lead
needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre. This
will ensure that your device remains safe to use.
Q Warranty
the warranty for this appliance is for 3
years from the date of purchase. the ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
General safety advice for electrical … / Before first use / Preparing the tool for use