Cleaning and care, Cleaning the appliance – Parkside PAS 500 C2 User Manual
Page 63
60
PAS 500 C2
GB
♦
Fill the metal container
10
to a maximum of half full, so that the HEPA fi lter
13
always remains free.
♦
To avoid unnecessary soiling, always empty the metal container
10
outdoors.
♦
Clean the HEPA fi lter
13
if the suction power decreases or if the viewing
window of the blockage indicator
3
on the container lid
5
is red.
Cleaning and care
DANGER
►
Before working on the appliance, disconnect the plug. There will be the risk
of a fatal electrical shock.
IMPORTANT
Penetrating moisture can lead to the appliance becoming damaged.
►
In order to avoid irreparable damage to it, ensure that no moisture gets
inside when you are cleaning the appliance.
►
Do not use aggressive or abrasive cleaning agents, as these can damage
the upper surfaces.
Cleaning the appliance
■
Clean the appliance after every use.
■
To avoid unnecessary soiling, always do the cleaning outdoors.
■
Remove the container lid
5
and empty the metal container
10
.
■
Clean the metal container
10
with water and then allow it to dry completely.
■
Clean the wire fi lter basket
14
and HEPA fi lter
13
(see Cleaning the wire fi lter
basket and HEPA fi lter).
Cleaning the wire-fi lter basket and HEPA fi lter (Figure D)
NOTICE
►
Replace the HEPA fi lter
13
if it is worn, damaged or heavily soiled.
■
Remove the container lid
5
.
■
Turn the wire fi lter basket
14
anti-clockwise and remove it. Tap the wire fi lter
basket
14
out.
■
Remove the HEPA fi lter
13
from the motor and tap it out. Clean the HEPA fi lter
13
with a brush or hand brush. Do NOT clean the HEPA fi lter
13
with water!
Buch_75872_LB2.indb 60
Buch_75872_LB2.indb 60
22.06.12 14:18
22.06.12 14:18