Danger – EdgeStar IP210SS User Manual

Page 6

UNPACKING YOUR ICE MAKER

1. Remove the exterior and interior packaging. Check that ice basket and ice scoop is

included. If any parts are missing, please contact customer service.

1. Remove the exterior and interior packaging. Check that ice basket and ice scoop is

included. If any parts are missing, please contact customer service.

2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean

it .

2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean

it .

3. Find a location for your ice maker that is protected from direct sunlight and other sources

of heat (e.g., stove, furnace, radiator). Place the ice maker on a level surface. Maker sure

that there is at least 5 inches of space between the back and sides of your ice maker and

the wall.

3. Find a location for your ice maker that is protected from direct sunlight and other sources

of heat (e.g., stove, furnace, radiator). Place the ice maker on a level surface. Maker sure

that there is at least 5 inches of space between the back and sides of your ice maker and

the wall.

4. Allow one hour for the refrigerant fluid to settle before plugging ice maker in.

5. The appliance must be positioned so that the plug is accessible.

CONNECTING YOUR ICE MAKER

DANGER

* Improper use of the grounded plug can result in the risk of electrical shock. If the

power cord is damaged please call customer service.

* Improper use of the grounded plug can result in the risk of electrical shock. If the

power cord is damaged please call customer service.

1. This unit should be properly grounded for your safety. The power cord of this appliance is

equipped with a threeprong plug which mates with standard three prong wall outlets to

minimize the possibility of electric shock.

1. This unit should be properly grounded for your safety. The power cord of this appliance is

equipped with a threeprong plug which mates with standard three prong wall outlets to

minimize the possibility of electric shock.

2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not

under any circumstances, cut or remove the third (ground) prong from the power cord. Any

questions concerning power and/or grounding should be directed toward a certified

electrician.

2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not

under any circumstances, cut or remove the third (ground) prong from the power cord. Any

questions concerning power and/or grounding should be directed toward a certified

electrician.

3. This appliance requires a standard 110~120 volt, 60Hz electrical outlet with threeprong

ground.

3. This appliance requires a standard 110~120 volt, 60Hz electrical outlet with threeprong

ground.

CLEANING AND MAINTAINING YOUR ICE MAKER

Before using your ice maker, it is strongly recommended to clean it thoroughly.

1. Take out the ice basket.

2. Clean the interior with diluted detergent, warm water and a soft cloth.

3. The outside of the ice maker should be cleaned regularly with a mild detergent solution

and warm water.

3. The outside of the ice maker should be cleaned regularly with a mild detergent solution

and warm water.

4. Dry the interior and exterior with a soft cloth.

5. When the machine is not in use, open the water drain cap to completely drain the water

reservoir.

5. When the machine is not in use, open the water drain cap to completely drain the water

reservoir.