Parkside PHD 150 A1 - Manual (Page 41)

41
MT GB
Technical data
Pressure Washer ................PHD 150 A1
Mains connection.................230V~, 50 Hz
Power consumption ...................... 2100 W
Mains cable .........................................5 m
Weight (without accessories) ......... 11,2 kg
Safety class ......................................... II
Degree of protection ..........................IPX5
Inflow temperature t, max. .................40°C
Inflow pressure p, max. ............... 0,8 MPa
Operating pressure p .....................11 MPa
Max. permissible pressure p max. 15 MPa
Pumping rate, water ................... 5,5 l/min
Pumping rate, water max............. 7,5 l/min
Sound pressure level (L
pA
)
.........................83,5 dB(A); K
pA
= 3,0 dB(A)
Sound power level
measured (L
WA
)
......................96 dB(A); K
wA
= 3,0 dB(A)
guaranteed ............................98,0 dB(A)
Vibration
(a
n
) ..................... 1,043 m/s 2 ; K=1,5 m/s²
≥100A
The equipment is intended only
for use in premises in which the
current bearing capacity of the
network is >=100 A per phase
and which are supplied by a
distribution grid with a nominal
voltage of 400/230V.
Technical and optical changes can be car-
ried out in the course of further development
without notice. All dimensions, references
and information of this instruction manual
are therefore without guarantee. Legal
claims, which are made on the basis of the
instruction manual, cannot thus be consid-
ered as valid.
Spare Parts Order
When buying parts for the pressure wash-
er, use the service address or fax number
given.
Please enter your machine type and the item
number of the part you are ordering.
Jet tube w/ high-pressure nozzle
.................................................. 91097403
Jet tube w/ flat spray nozzle ..... 91097404
Quick-action water
supply connector ...................... 91097401
Jet gun ...................................... 91097399
Rotating brush .......................... 91097405