beautypg.com

Start-up, Ie gb – Parkside PHD 150 A1 User Manual

Page 7

background image

7

IE

GB

Overview

A

1 Jet gun

2 Carrying handle

3 High-pressure hose on reel

4 Hose reel crank

5 Cable hook

6 Mains lead

7 Wheels

8 Strainer frame

9 Water supply

10 On/Off switch

11 Jet gun holder

12 High-pressure fitting (gun)

13 Opening of cleaning agent tank

14 Quick-action

water supply connector

15 Cleaning agent tank

16 Accessories holder

17 Jet tube w/ high-pressure nozzle

18 Jet tube w/ flat spray nozzle

19 Rotating brush

20 Nozzle cleaning pin

21 Cleaning agent

Functional description

The pressure washer uses high-pressure

water for cleaning.

A detergent can be added if this is re-

quired.

For the functions of the operating elements

please refer to the subsequent description.

Ensure that the safety instructions are al-

ways observed!

Scope of Delivery

Unpack the pressure washer and verify the

contents:

- Pressure washer with power supply

cable

- High-pressure hose on reel

- Cable hook

- Jet gun holder

- Quick-action

water supply connector

- Jet gun

- Jet tube w/ high-pressure nozzle

- Jet tube w/ flat spray nozzle

- Rotating brush

- Nozzle cleaning pin

- 0.5 l cleaning agent

- Fork spanner

Start-up

In keeping with current regulations

a pressure washer must never be

operated off the drinking water mains

supply without a controllable back-

flow preventer. A suitable backflow

preventer in conformity with EN

12729 type BA must be used.

Water that has passed through a backflow

preventer is classified as undrinkable.

A backflow preventer is available in spe-

cialist shops.

Setting up

• Slide the cable hook (5) and the jet

gun holder (11) onto the guides on the

device housing.

• Connect the high-pressure fitting (jet

gun) (12) to the jet gun (1). Use the

fork spanner from the package.

• Connect the quick-action water supply

connector (14) to the unit’s water sup-

ply port (9).

• Plug in and turn the jet tube with high-

pressure nozzle (17) or the jet tube

with flat spray nozzle (18) or the rotat-

ing brush (19) to connect to the jet

gun (1).

• To change the jet tube (17/18) or the

rotating brush (19) push in the tube or

brush and turn in the opposite direc-

tion.