beautypg.com

Operation / cleaning / service / warranty, Changing the nozzle, Cleaning – Parkside PHLG 2000 B1 User Manual

Page 33: Service, Warranty

background image

34 GB/MT

Q

Changing the nozzle

Too much heat causes paints

and plastics to ignite.

CAUTIoN! Do not inhale the resulting vapours.

Protector nozzle

4

– for removing paint

and varnish (see Ill. B):

j

Place the protector nozzle

4

on the

outlet tube

3

.

j

The spatula shape of the nozzle ensures the air
is properly directed. Use a separate spatula for
removing paint or varnish.

Flat nozzle

5

– for detaching glues,

softening paint (see Ill. C):

j

Place the flat nozzle

5

on the outlet tube

3

.

j

Do not apply heat for too long a period, as
burnt paint becomes much more difficult to
remove. Many glues can be softened by warm-
ing. Glued connections can then be detached
and excess glue removed.

Reducing nozzle

6

– for welding plastic:

j

Place the reducer nozzle

6

on the

outlet tube

3

.

j

Use the reducing nozzle

6

for heat-shrinkable

sleeves and film.

Q

Further examples of uses in

the house, car and garden

Defrosting water pipes:
Notice!
It must not be used for thawing PVC pipes.
Notice! It is often very difficult to tell the difference
between gas pipes and water pipes. If in doubt,
ask a competent person.

Notice! Copper pipes are joined using tin solder
and must not be heated above 200 °C.

Loosening a threaded connection:

j

Heating the threaded connection carefully can
often allow the connection to be released.

Removing weeds:

j

The heat dries out the weeds and micro-
organisms.

Lighting barbecue charcoal (see Ill. E):

Do not use methylated alcohol.

j

Push the barbecue lighting nozzle

7

on to the

hot air nozzle

3

.

j

Charcoal ignites in a few minutes.

Wax removal:

j

You can remove wax residues from skis / snow-
board or from candle holders. Use the amount
of care appropriate to the product.

Q

Cleaning

Before carrying out work on the

appliance, always remove the plug from the power
socket.

j

Keep the air inlet and outlet clean.

j

Use a cloth to clean the housing. Use a soft
cloth to clean the housing. Never use petrol,
solvents or cleaning agents as these may
attack the plastic.

Q

Service

J

Have your device

repaired only by qualified specialist
personnel using original manufacturer
parts only.
This will ensure that your device
remains safe to use.

J

If the plug or mains

lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.

This will ensure that your device remains safe
to use.

Q

Warranty

The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care

Operation / Cleaning / Service / Warranty