Parkside PNTS 1300 - Manual (Page 6)

6
PNTS1300-061009op
GB IE CY
lead and the extension cable for damage
and ageing. Do not use the equipment if
the cable is damaged or worn.Danger of
electric shock hazard.
• If the power cable of the appliance is dam-
aged it must be replaced with a spezial
connecting cable by the manufacturer, the
after-sales service or a qualified person.
• Switch the machine off and disconnect the
mains plug:
- when the machine is not in use,
- before the machine is opened up,
-
for all maintenance and cleaning work,
- if the connecting cable is damaged or tan-
gled up.
• Only use replacement parts and acces-
sories delivered and recommended by our
Service Centre (see addresses page 9).
The use of parts by other manufacturers
immediately renders the guarantee void.
• Do not use the cable to pull the plug out
of the socket. Protect the cable from heat,
oil, and sharp edges.
• Make sure that the mains voltage corre-
sponds with the information on the rating
plate.
• Only plug the appliance into a socket
which is safeguarded by at least 16A.
• The device must only be connected to a
mains socket via a residual-current circuit
breaker (RCD) with a rated leakage cur-
rent of not more than 30 mA.
CAUTION! The following states how dam-
age to the appliance and possible injury to
people can be avoided:
• Ensure that the machine is correctly assem-
bled and the filters are in the correct position.
• Do not use without the filter. This could
damage the machine.
• Only have repairs carried out at our au-
thorised customer service points.
• Observe the instructions for cleaning and
maintenance of the machine.
• Store the appliance in a dry place and out
of reach of children.
Description of operation
The wet and dry vacuum cleaner is equipped
with a robust plastic container for waste col-
lection. The castors make the appliance
very easy to manoeuvre. The suction flow is
switched off by a float during wet vacuuming
once the waste tank is full. The appliance is
also equipped with a blower function.
The following describes the function of the
operating parts.
You will find illustrations for the ma-
chine on the fold-out pages.
Overview
A Housing
1 Motor housing
2 Carrying handle
3 On / off switch
4 4 attachment ports for accessories
5 Suction connection
6 Waste container
7 4 feet with castors and accessory
fittings
8 Cable holder
9 Mains cable
10 Locking clips
11 Blower connection
Accessories
12 3-part vacuum tube
13 Vacuum hose with
14 Handle component
Filter
15 Foam filter for wet vacuuming
16 Material filter for dry vacuuming
17 Paper filter bag for vacuuming fine dust
Nozzles
18 Floor nozzle with
19 Turnable insert attachment
with brush and rubber lip, for vacu-
uming carpets and smooth surfaces
20 Crevice nozzle