Eureka 6700 - Manual (Page 7)

Continued
7. Depress buttons on side of hose
coupling; insert swivel hose until it
locks in place.
8. Plug short adapter cord into handle.
Push down on the plug until the clip
snaps over the ridge on the inside of
the handle.
To remove hose, release the clip
on the side of the handle and
unplug the cord. Depress the
buttons on the side of the hose
coupling and pull up.
9. Step on Cordaway ® cord reel button,
pull cord, and place plug into outlet.
NOTE: Some cleaners feature a
quick release cord wrap on
the underneath side rather
than the cord reel (see
Detail D). Twist lower cord
hook upward to release
cord.
10. Step on motorized nozzle handle
release; pull back to comfortable
work position.
11. Push On/Off canister switch.
(A thermostat automatically shuts
off the motor if it overheats, see
Automatic Motor Shut-Off).
12. Select bare floor or carpet cleaning
on remote control, only.
NOTE: Optional remote controls on
the hose handle will only
operate if the canister power
switch is on.
Detail D
11
9
7
8
*Tool-Pak ® with
Optional
Storage Cover
ON/OFF
Switch
Buttons
Cordaway ®
Cord Reel
Refer to rating plate
(on underside of
cleaner) when
inquiring about
service.
Bag Change Indicator
Change bag when warning
appears. Fine substances block air
passage and cause indicator to
move across window when bag
does not appear to be full. Bag
should be changed for maximum
performance.
Hold and guide
plug when
rewinding
7