Emerson SMARTSET CKD5809C - Manual (Page 26)

2 5
7.) After the last programmed track has played the player stops and the PLAY and
Program “PROG” indicators go ‘Off’. However the program sequence remains
in the memory.
To play the programmed sequence again press the PROGRAM button and
then press the PLAY/PAUSE button.
If you press the PLAY/PAUSE button without pressing the PROGRAM
button normal playback will begin on Track 1 as usual.
8.) To cancel the programmed sequence from the memory, press the STOP
button while the player is at programming mode.
The programmed sequence is also canceled if the CD door is opened, the
Tuner mode is selected or the power is switched ‘Off’.
Programmed Repeat Playback
You can use the Repeat and Programmed Playback features together to
continuously repeat a programmed sequence of tracks if desired.
First program the desired tracks and start playback following steps 1 through 6
above.
Then press the REPEAT button twice to
select All Tracks Repeat. The programmed
sequence will be repeated continuously.
REP
CKD5809_021705.p65 17/2/2005, 14:58 25