Linx Technologies LICAL-ENC-HS001 - Manual (Page 3)

– – 1
Description
HS Series encoders and decoders are
designed for maximum security remote control
applications. The HS encoder encodes the
status of up to eight buttons or contacts into
a highly secure encrypted output intended for
wireless transmission via a RF or infrared link.
The HS Series uses CipherLinx™ technology,
which is based on the Skipjack algorithm
developed by the U.S. National Security Agency
(NSA) and has been independently evaluated by
ISE. CipherLinx™ never sends or accepts the
same data twice, never loses sync, and changes
codes on every packet, not just every button
press. In addition to state-of-the-art security,
the tiny 20-pin SSOP packaged parts also offer
innovative features, including up to 8 data lines,
multiple baud rates, individual “button level” permissions, keypad user PIN,
encoder identity output, low power consumption and easy setup.
Features
• CipherLinx TM security technology
• ISE evaluated
• Never sends the same packet
twice
• Never loses sync
• PIN-protected encoder access
• 8 selectable data lines
• "Button level" permissions
• Encoder ID available at decoder
• Wide 2.0 to 5.5V operating
voltage
• Low supply current (370µA @ 3V)
• Ultra-low 0.1µA sleep current
• Selectable baud rates
• No programmer required
• Small SMD package
Applications
• Keyless entry / access control
• Door and gate openers
• Security systems
• Remote device control • Car alarms / starters
• Home / industrial automation
• Remote status monitoring
HS Series Remote Control Encoder
Data Guide
Revised 3/11/2015
0.030
(0.75)
0.007
(0.18)
0.013
(0.32)
0.026
(0.65)
0.309
(7.85)
0.207 (5.25)
0.284
(7.20)
LICAL-ENC-HS001
YYWWNNN
EVALUATED
EVALUATED CipherLinx
Technology
®
Figure 1: Package Dimensions