Linkskey LKG-6100 - Manual (Page 2)

1
LKG-6100 Rev.D
Overview
LKG-6100 is a high-bandwidth network adapter that auto-senses
10/100/1000Mbps connection speed, half/full-duplex modes, and MDI-X
media type. It includes the latest VLAN tagging to efficiently utilize
network bandwidth for maximum data throughput.
It also provides Data Rate to 20/200/2000Mbp in Full-Duplex Mode.
LKG-6100 provides high-bandwidth connection to your desktop.
Features
‧ Support 32-Bit PCI Local Bus Master high-speed operation
‧ 1 x 10/100/1000Mbps Auto Negotiation and Auto MDI-X Gigabit Port
‧ Supports Full-Duplex Mode Doubles Network Data Rate to
20/200/2000Mbp
‧ Supports IEEE 802.1Q VLAN Tagging
‧ Built-in FIFO buffers reduce overhead of memory transfers
‧ Supports Wake-on-LAN
‧ Supports Jumbo Frame transfers
‧ Plug and Play
Installation
1. Insert the Driver CD-ROM into your CD-ROM drive and click Install Driver.
2. Choose a suitable OS and follow the Wizard instructions and then click Finish
3. Shutdown your computer and then open the computer’s case.
4. Insert the LKG-6100 firmly into an available PCI slot and then turn on the computer.
5. Connect a RJ45 network cable from the computer to an available Ethernet port on
your router or switch. Your installation is completed.
2
1
2
3