Emerson Radio ES88 - Manual (Page 13)

12
OPERATING INSTRUCTIONS
• Make sure the Thinovation™ Speakers Panel is properly mounted and
locked onto the speaker mounting bracket.
• Make sure that the FM antenna wire is fully unwound and extended.
• Make sure that you have installed the batteries in the remote control.
• Make sure that the AC power cord is properly connected to the AC socket
on the back panel, and to a 120V 60Hz household AC power outlet.
USING THE CONTROLS
Most of the functions of this system can be operated by pressing the buttons on
the front panel, or the corresponding buttons on the remote control handset. If a
particular function can only be operated by controls on the main unit or controls on
the remote, the instructions will specify:
“MAIN UNIT ONLY” or “REMOTE CONTROL ONLY”
ELECTRONIC VOLUME CONTROL
Press the VOLUME + or – buttons on the front panel or the remote control to
increase or decrease the volume. The volume level indicator appears in the main
display. The range is from “00 db” (Minimum) to “80 db” (Maximum). The system
remembers the volume level when the power is switched ‘Off’ and returns to the
same level when the power is switched ‘On’ again.
ES88_ib072503.p65 25/7/2003, 10:09 12