Linkskey LDV-DM02ESK - Manual (Page 2)

Q uick R eference S heet A pplicable M odels: LDV -D M 02E S K /LDV-D M 04ESK
Q uick R eference S heet
QUICK REFERNCE SHEET for Dual Monitor DVI KVM Switch Operation Commands
Hotkeys/ Front-Panel Button
Command Hotkeys Front-panel Button Description
ScrLk + ScrLk + (x)
1
Select P C (x is a top-row number key)
x = 1 ~ 2 or x = 1 ~ 4 for PC channel no.
-- Select the active channel
N ext low er channel ScrLk + ScrLk + ↑ (arrow up) -- Select the next lower connected channel
N ext higher channel ScrLk + ScrLk + ↓ (arrow down)
Press the push button to switch to the
next channel
Select the next higher connected channel
A utoscan B eep S ound
O n/O ff
ScrLk + ScrLk + B --
Toggle on/off the beep sound for switching
confirmation while autoscanning
R eset C onsole M o use ScrLk + ScrLk + End -- Reset mouse on the console side
A utoscan ScrLk + ScrLk + S --
Autoscan through every connected channel for
quick screen browsing of each channel
Stop A utoscan Any key on keyboard -- Terminate Autoscan activity
Notes:
1 Note that (x) denotes a number key for the selected port number (from 1 ~ 4). Use only the number keys on the upper row of the keyboard.
Important Note: Digital display resolution is up to 1600 x 1200 pixels
Hotkey convention: The hotkey notation ScrLk + ScrLk + (key), denotes that you should hit the individual key consecutively one at a time, not simultaneously.
Rev. 1.0 Copyright© All rights reserved. June 2004
Technical Support
E-mail:
[email protected]
Website: www.linkskey.com