Linkskey LDV-DM202AUSK User Manual

Page 2

Quick Installation Guide

Applicable models: LDV-DM202AUSK/LDV-DM204AUSK 2/4-port Dual Monitor DVI KVM Switch w/ Audio&Mic

Q u i c k R e f e r e n c e S h e e t

2/4-port Dual Monitor DVI KVM Switch w/ Audio & Mic -- Operation Commands for Hotkeys / Front-Panel Buttons

Hotkey sequence = [ScrLk]

+ [ScrLk]

+ Command key(s)

* User-definable Preceding sequence = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK

Command

Hotkeys

Front-panel Buttons

Description

Select PC Channel

(Joint-select PC port/hub port control/audio&mic,
if binding is enabled)

ScrLk + ScrLk + (x)

(x is a top-row number key)
x = 1~2 / x = 1~2 for PC channel no

Press the corresponding button to select the active
PC channel

Select the active PC channel
(Joint-select PC port/hub port control/audio&mic , if binding

is enabled)

Select Hub Port Control

(Joint-select PC & Hub port control, if binding is
enabled)

ScrLk + ScrLk + (Fx)

Fx = F1~F2 / Fx = F1~F4 ; Fx is a function key ;
x = 1~2/ x = 1~4 for PC channel no

(Press the corresponding button to select the
specific PC+USB hub port control --works only if

PC port/hub port control binding enabled)

Select the PC channel that control all USB hub ports
(Joint-select PC & Hub port control, if PC/hub port control

binding is enabled)

Select Audio&Mic Channel

(Joint-select PC port & audio/mic , if binding is

enabled)

ScrLk + ScrLk + (Fy)

Fy = F5~F6/ Fy = F5~F8 ; Fy is a function key ;

y = 1~2/ y = 1~4 for audio channel no

Select the active Audio&Mic channel
(Joint-select PC & audio&mic channel, if binding is enabled)

Bind PC & Hub Port Control Switching

[Default]

ScrLk + ScrLk + Z

Enable the binding of PC port and hub port control switching.
(Once this feature is enabled, any pc and/or hub port control

switching is bound together) (factory default)

Unbind PC & Hub Port Control Switching

ScrLk + ScrLk + X

Disable the binding of PC port and hub port control switching

Bind PC & Audio/Mic Switching

[Default]

ScrLk + ScrLk + Q

Enable the binding of PC port and audio&mic switching. (Once
this feature is enabled, any pc and/or audio&mic switching is
bound together) (factory default)

Unbind PC & Audio/Mic Switching

ScrLk + ScrLk + W

Disable the binding of PC port and audio&mic switching

Next lower PC channel

(Joint-select PC /hub port control/audio&mic,
if binding is enabled)

ScrLk + ScrLk + ↑ (arrow up)

Select the next lower connected PC channel
(Joint-select PC/hub port control/audio&mic, if binding is

enabled)

Next higher PC channel

(Joint-select PC /hub port control/audio&mic,
if binding is enabled)

ScrLk + ScrLk + ↓ (arrow down)

Select the next higher connected PC channel

(Joint-select PC/hub port control/audio&mic , if binding is
enabled)

Previous PC channel

ScrLk + ScrLk +  (Backspace)

Toggle between the previous channel and current channel

Beep Sound On/Off

ScrLk + ScrLk + B

Toggle on/off the beep sound while autoscanning

Define Hotkey Preceding Sequence

ScrLk + ScrLk + H + (y)

y = SCROLL LOCK, CAPS, ESC,
F12 or NUM LOCK

Press and hold down last button (Button 2) till
two beeps, release the button, then press (y) key

Select the hotkey preceding sequence among 5 alternative keys

Autoscan

ScrLk + ScrLk + S

Autoscan through every connected channel for quick screen

browsing of each channel (scan delay = 5 sec.).

Autoscan with Programmable Delay Time

ScrLk + ScrLk + S + (z)

z = 0~9
1  10” ; 2  20” ; 3  30” ; 4  40” ; 5  50”
6  60” ; 7  70” ; 8  80” ; 9  90” ; 0  100”

Autoscan with a user-defined delay time within a range of
10 ~ 100 seconds

Stop Autoscan

Press any key on keyboard

Press any button

Terminate Autoscan activity

Notes:
1. The USB keyboard hotkeys allows you a faster and broader control for your KVM switching operation in addition to the front-panel buttons. If you have configured a hotkey preceding sequence other than two

consecutive scroll locks, you should change your hotkey sequence accordingly.(For preceding sequence key configuration, please refer to Quick Installation Guide)

2. When the binding of PC & USB hub port control switching is enabled by the hotkey sequence: ScrLk + ScrLk + Z, any PC and hub port control switching are bound together.

To remove this binding, use the hotkey sequence: ScrLk + ScrLk + X.

3. When the binding of PC & Audio&Mic switching is enabled by the hotkey sequence: ScrLk + ScrLk + Q, any PC and audio&mic switching are bound together.

To remove this binding, use the hotkey sequence: ScrLk + ScrLk + W.

LED Information: Green LED indicates PC port status: solid green – active port; flashing green – PC not connected; Red LED indicates hub port control status: solid red – that PC has the control of all hub ports.

Important Note: The USB hub control status LED (red) indicates not the connected status of each USB device, but indicates which PC port has the control of all hub ports and their connected devices.
For example, when USB LED 1 is lit, it means PC port 1 has the current control of all hub ports and their connected USB devices.

Technical Support
E-mail:

[email protected]

Website: www.linkskey.com

RoHS Compliant

Technical Support
E-mail:

[email protected]

Website: www.linkskey.com

This manual is related to the following products:

LDV-DM204AUSK