Linkskey LDV-242AUSK User Manual

Page 2

Quick Reference Sheet Applicable models: LDV-242AUSK

Q u i c k R e f e r e n c e S h e e t

Notes:
1. The USB keyboard hotkeys allows you a faster and broader control for your KVM switching operation in addition to the front-panel buttons. If you have configured a hotkey preceding sequence other than
two consecutive scroll locks, you should change your hotkey sequence accordingly.(For preceding sequence key configuration, please refer to Quick Installation Guide)
2. When the binding of PC & USB hub port control switching is enabled by the hotkey sequence: ScrLk + ScrLk + Z, any PC and hub port control switching are bound together. To remove this binding, use the
hotkey sequence: ScrLk + ScrLk + X.
3. When the binding of PC & Audio&Mic switching is enabled by the hotkey sequence: ScrLk + ScrLk + Q, any PC and audio&mic switching are bound together. To remove this binding, use the hotkey sequence:
ScrLk + ScrLk + W.

2-port Compact Desktop DVI USB KVM Switch w/ Audio&Mic -- Operation Commands for Hotkeys / Front-Panel Buttons

Hotkey sequence = [ScrLk]

+ [ScrLk]

+ Command key(s) * User-definable Preceding sequence = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK

Command

Hotkeys

Front-panel Buttons

Description

Select PC Channel

(Joint-select PC port/hub port control/audio&mic,
if binding is enabled)

ScrLk + ScrLk + (x)

(x is a top-row number key)
x = 1~2 for PC channel no

Press the corresponding button to select the
active PC channel

Select the active PC channel
(Joint-select PC port/hub port control/audio&mic , if
binding is enabled)

Select Hub Port Control

(Joint-select PC & Hub port control, if binding is
enabled)

ScrLk + ScrLk + (Fx)

Fx = F1~F2 (Fx is a function key)
x = 1~2 for PC channel no

(Press the corresponding button to select the
specific PC+USB hub port control --works
only if PC port/hub port control binding
enabled)

Select the PC channel that control all USB hub ports
(Joint-select PC & Hub port control, if PC/hub port control
binding is enabled)

Select Audio&Mic Channel

(Joint-select PC port & audio/mic , if binding is
enabled)

ScrLk + ScrLk + (Fy)

Fy = F5~F6 (Fy is a function key)
y = 1~2 for audio/mic channel no

Select the active Audio&Mic channel
(Joint-select PC & audio&mic channel, if binding is enabled)

Bind PC & Hub Port Control Switching

[Default]

ScrLk + ScrLk + Z

Enable the binding of PC port and hub port control switching.
(Once this feature is enabled, any pc and/or hub port control
switching is bound together) (factory default)

Unbind PC & Hub Port Control Switching

ScrLk + ScrLk + X

Disable the binding of PC port and hub port control switching

Bind PC & Audio/Mic Switching

[Default]

ScrLk + ScrLk + Q

Enable the binding of PC port and audio&mic switching.
(Once this feature is enabled, any pc and/or audio&mic
switching is bound together) (factory default)

Unbind PC & Audio/Mic Switching

ScrLk + ScrLk + W

Disable the binding of PC port and audio&mic switching

Next lower PC channel

(Joint-select PC /hub port control/audio&mic,
if binding is enabled)

ScrLk + ScrLk + ↑

(arrow up)

Select the next lower connected PC channel
(Joint-select PC/hub port control/audio&mic, if binding is
enabled)

Next higher PC channel

(Joint-select PC /hub port control/audio&mic,
if binding is enabled)

ScrLk + ScrLk + ↓ (arrow down)

Select the next higher connected PC channel
(Joint-select PC/hub port control/audio&mic , if binding is
enabled)

Previous PC channel

ScrLk + ScrLk +

(Backspace)

Toggle between the previous channel and current channel

Define Hotkey Preceding Sequence

ScrLk + ScrLk + H + (y)

y = SCROLL LOCK, CAPS, ESC,
F12 or NUM LOCK

Select the hotkey preceding sequence among 5 alternative
keys

Autoscan

ScrLk + ScrLk + S

Autoscan through every connected channel for quick screen
browsing of each channel (scan delay = 5 sec.).

Autoscan with Programmable Delay Time

ScrLk + ScrLk + S + (z)

z = 0~9

10” ; 2

20” ; 3

30” ; 4

40” ; 5

50”

60” ; 7

70” ; 8

80” ; 9

90” ; 0

100”

Autoscan with a user-defined delay time within a range of
10 ~ 100 seconds

Stop Autoscan

Press any key on keyboard

Press any button

Terminate Autoscan activity

RoHS Compliant

Technical Support
E-mail:

[email protected]

Website: www.linkskey.com