Larco Guardian II - Manual (Page 10)

Access Controller
Installation Guide
Page 10 of 15
Power Fail – LOCK with 433 MHz Wireless Receiver
Controller, Strike & Receiver powered using same voltage source.
The Larco 433MHz Dual Channel Micro handheld Transmitter (#234518) is
used to activate the wireless receiver.
Notes:
1. Maximum AC voltage input: 12vRMS.
2. Important – Do not connect the fly back diode
on AC applications.
3. Connections are shown when using a DC powered
strike or magnetic latch.
4. All long dashed lines denote any optional or
customer supplied items.