Bang & Olufsen BeoVision 8-40 Supplement to User Guide (pre Aug 2010) - Manual (Page 4)

>> New features in your television
You have the possibility of adding additional
HDMI sources. You can at any time enable or
disable an HDMI Expander connected to the
HDMI-B socket.
If you set the HDMI EXPANDER in the
CONNECTIONS menu to YES, the HDMI-B
option in the AV menus is replaced with B1,
B2, B3, and B4.
The sources in the AV1–4 menus have
changed.
SOURCE … Select the source you have connected.
The option you select indicates which remote
control button switches on the source. For
example, a source registered as V.MEM is
switched on when you press the V MEM button.
V.MEM … If you have connected a Bang &
Olufsen video recorder or any other video
recorder.
DVD … If you have connected a DVD player or
recorder.
DVD2 … If you have connected a DVD player or
recorder.
TV … If you have connected a set-top box
registered as TV.
DTV … If you have connected a set-top box
registered as DTV.
DTV2 (V.AUX) … If you have connected a
set-top box or other equipment registered as
DTV2.
V.AUX2 … If you have connected a video game
console.
DECODER … If you have connected a decoder.
PC … If you have connected a PC.
NONE … If no equipment is connected.
If you have a Bang & Olufsen recorder it must be
connected to the AV4 socket.
Refer to chapter ‘Tuner setup’ in the Guide
enclosed with your BeoVision for further
information.
HDMI Expander AV1–4 sources
CONNECTIONS
AV1 V.MEM
AV2 NONE
AV3 NONE
AV4 NONE
HDMI EXPANDER NO
LINK TUNING
store
4