Ergotron AOC LM520 - Manual (Page 11)

AOC LM520
11 v3_123102 AOC LM520
Operating Instructions
Adjusting the OSD Settings
1. Press the Shuttle Knob button to open the
OSD window.
2. Rotate the Shuttle Knob until the desired
function is highlighted.
3. Press the Shuttle Knob again to open the
function window.
4. Rotate the Shuttle Knob to change the settings
of the function.
5. To save and exit, highlight the EXIT icon and
press Shuttle Knob or leave the monitor
alone for 10 seconds. If you want to adjust any
other function, repeat steps 2-4.
Note: When the OSD window is open, the input
signal timing settings appear at the top.
H: stands for horizontal frequency and
V: stands for vertical frequency.