LeMond RevMaster Pro User Manual
Page 22
22
SYMpTOM: Inconsistent resistance or noisy brake pad.
Remove fender assembly and make sure brake pad is clean.
1.
Apply brake pad oil (or 3-In-One oil) to surface of brake pad.
2.
Let oil soak into pad and reapply if needed until brake pad is thoroughly saturated.
3.
Reinstall fender assembly.
4.
SYMpTOM: Rocking or movement from RevMaster while in use.
Using a 5mm hex wrench, check the attachment bolts on the front and rear stabilizers and make
1.
sure they are tight (4 bolts on each stabilizer).
Note: You will have to remove the stretch pad to check the rear stabilizer mounting bolts.
Assure the bike is level by checking the leveling feet on the bottom of the front and rear stabilizers.
2.
TROUBLEShOOTING
This manual is related to the following products: