Lanner LEC-7230 - Manual (Page 8)

8
System Components
Chapter 2
Embedded and Industrial Computing
Component Description Pin Definition
Reference
F1 Reset Reset switch
F2 MIC IN/LINE OUT Connect the audio devices to these ports. The
Microphone and line out port are provided by
Realtek ALC
886-GR.
F3 USB 3.0 Port An USB 3.0 type A connector. USB2 on page 14
F4 Two USB 2.0 Ports An USB 2.0 type A connector. USB1 on page 14
F5 Two 10/100/1000Mbps LAN ports Two RJ-45 (network) jacks with LED indicators
as described below. Both LAN ports are
provided by Intel 82583V. The 82583V supports
PXE remote boot
LINK/ACT (Yellow)
On/Flashing: The port is linking and active •
in data transmission.
Off: The port is not linking. •
SPEED (Green/Yellow)
Yellow: The connection speed is •
1000Mbps.
Green: The connection speed is 100Mbps •
Off: The connection speed is 10Mbps. •
F6 HDD (Yellow)
3G Status (Green) and
Power LED (Green) HDD
Blinking: data access activities •
Off: no data access activities •
3G Status
Blinking: 3G transmission activities •
On: 3G expansion card exists •
Off: no 3G expansion card exists •
Power
On: The computer is on. •
Off: The computer is off . •
F7 Power-on Switch A power-on switch through the Phoenix
contact for distant power-on/off control
PSBTN2 on page 15
F8 Power Button with dual LED ATX Power-on button with LEDs: Standby
mode in Red; Power-on mode in Green
Front Components
sPEEd LINK/ACT
F3 F1 F2 F5 F6
F8
F4 F7