Laney IRT-X User Manual

Page 16

Power Requirements:

~115V (~85V-132V) & ~230V (~170V-264V)(User selectable via panel switch)

Typical power consumption:

100W at 50-60Hz.

Amplifier power output:

200W into 4R @1%THD.

Amplifier topology:

High performance Class D with SMPS.

Loudspeakers:

1x8” Custom high power bass driver.

1” compression driver tweeter.

Crossover:

2 way passive with tweeter protection.

Line/Mic. Input sensitivity:

30mV (-28dBu) 10K Ohms Balanced.

Maximum input 10V (+22dBu).

Amplifier Input sensitivity:

Recommended amplifier range 100mW-120Watts

<10W

63mV (-22dBu) Peak ~20V (+28dBu) (220R balanced).

>10W 775mV (0dBu) Peak ~200V (+48dBu) (220R balanced).

Maximum continuous ~40V (+34dBu) Dissipation limited.

DI Output:

77.5mV (-20dBu) Nominal (100R balanced).

Selectable source: Input /Post Emulation/Post FX

Line Output:

775mV (0dBu) Nominal (1k Ohm unbalanced)

Selectable: Mono out/Stereo Left out

FX Send:

388mV (-6dBu) Nominal (1k Ohms unbalanced)

FX Return L&R:

388mV (-6dBu) Nominal (10k Ohms unbalanced)

Auxiliary Input:

Stereo 388mV (-6dBu) (10K Ohms unbalanced)

External Speaker:

Recommended: 8 Ohms (100W), 16 Ohms (60W), 4 Ohms 200W (Minimum Load Impedance)

(Floating output do not ground either terminal)

Amplifier Power range:

40Hz-35kHz -3dB (40Hz 3 Order HPF)

Distortion:

<0.01% THD+N

Unit Dimensions:

H425,W280,D265 Weight: 11.5Kg