Media player controls – Laney AH110 User Manual

Page 9

Media Player Controls

MEDIA PLAYER

MODE

HOLD ON USB/SD/BT/ OFF

MEDIA PLAYER:

Use the onboard player for playing back MP3/ WMA encoded audio tracks from SD card/USB or
Bluetooth® device.
1. SD CARD SLOT: Insert your standard SD card here.

(Automatically detected on insertion, or if removed & reinserted uses smart technology
to resume play from the previous point).

2. DISPLAY SCREEN: Display track information.

a. Pause or Play indicator
b. What device is being used: USB or SD Card
c. Time into track
d. “blue” is displayed when using a Bluethooth Device

3. MEMORY STICK SLOT: Connect your USB memory stick here.

(Automatically detected on insertion, or if removed & reinserted uses smart technology
to resume play from the previous point).

NOTE. The USB socket is for the playback of recorded tracks only, not for
charging a USB device.

4. MODE: Select the input source - SD card USB or Bluetooth and turn OFF the player.

5. PLAY/PAUSE: Use this control to play or pause your MP3 music/backing track.
6. LOOP: Use this to enable/disable the looped playback modes.

When using this button with an SD card or USB Stick, there are 2 options:
ALL - Plays all the tracks on the root of the device in date order, then the sub folders
ONE - Plays one track repeatedly (cycle to the required track to play using NEXT button (8).

7. PREVIOUS: Press to skip to the preceding track.
8. NEXT: Press to skip to the next track.

a. CONNECT TO BLUETOOTH

DEVICE: Toggle through the system modes and select Bluetooth (using MODE switch (4)).

b. On your Bluetooth capable device, make sure bluetooth is enabled. Scan down the list of available devices - search for: Laney Audiohub and select.

c. Your AudioHub is now connected to your bluetooth device & controlled using the PLAY/PAUSE, PREVIOUS & NEXT BUTTONS
d. Switching between a USB device and a Bluetooth device is possible, but the Bluetooth device will need to be reselected by pressing the MODE

button once.

Only one Audiohub can be paired to your Bluetooth capable device at once, so remember to de-select & forget a device if you plan to use a different

Audiohub device next time.

This manual is related to the following products:

AH112 AH115