Laney A1 - Manual (Page 4)

7
3
5
4
6
1
2
Combi Socket (for use with either XLR or 6.3 Jack) is provided for connecting your instrument or
microphone. Only use good quality screened cable.
Engages an EQ pre-shape circuit to give a natural Mid cut, Bass & Treble Boost sound.
Lights when peak levels are reached. To give optimum levels adjust Gain(4) till the peak LED just illuminates
on the very loudest passages. (After adjusting the EQ it may be necessary to readjust Gain)
Controls the level of preamp gain on the channel. Turning this control clockwise will add more gain to your
guitar signal, use this in conjunction with Volume (13) to achieve the correct volume and gain level you
require.
Active Bass control allowing boost and cut of the low-frequency response of the pre-amplifier. To give
optimum levels adjust gain till the peak LED just illuminates on the very loudest passages.
Selects the mid-frequencies (200Hz to 9KHz) to be cut or boosted in conjunction with the paramid level
control (7)
Boosts or cuts the chosen frequency set by (6). To boost the chosen frequency turn the control clockwise,
to cut the chosen frequency turn anticlockwise.
1
2
1+2
ON
4
FRONT PANEL CONTROLS