Laney RB4 - Manual (Page 7)

7
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal Household
waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the
WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (2004/108/EEC),
RoHS (EU2002/95/EC), WEEE (EU2002/96/EC)
In the interest of continued development, Laney reserves the right to amend product specification without prior notification.
SPECIFICATIONS
~120V
~220V>~240V
3.5mm Strereo Socket 3.5mm Strereo Soc ket 3.5mm Strereo Socket
12Kg
10.25Kg
Yes Yes
Features:
RB115 / RB410
156*485*256 (H*W*D)
Yes - (0dBu Nominal) (Series-Insert)
Total impedance of connected cabinets
should not be less than 4 Ohms
1M Ohm/100pF
150W
Treble (±15dB at 3.5KHz, Shelving)
Yes, Balanced XLR
Enhance
Switchable compressor with Activity Light
Clip Distortion Limiter
Bass (±12dB at 40Hz, Shelving)
7 Band Graphic (±15dB at 40,
80,160,400,800,2K,6K Peak ing)
Gain
21Kg 23.5Kg
RB115 / RB410
Yes - Comfortable Contoured Grip
1M Ohm/100pF
Yes, Balanced XLR
Yes
Yes - (0dBu Nominal) (Series-Insert)
RB9
~120V, ~220V, ~230V, ~240V 50/60Hz
T5A L
T2A L
450W
300W
Normal & Hi Inputs
Packed Weight
RB4 RB8
553*485*303 (H*W*D) 553*485*353 (H*W*D)
19Kg 21.6Kg
100W 150W
RB115 / RB410
Recommended Min Ex speaker Power
Recommended Richter Ex Cabinet
Size
Yes - Comfortable Contoured Grip
Unit Weight
Side Handles
Supply Voltage on all models:- Fac tory
Preset
1M Ohm/100pF
T3.15A L
T1.6A L
200W
165W
15” Custom Designed Driver + Switchable
HF Horn
Normal & Hi Inputs
Switchable c ompressor with Activity Light
Treble (±15dB at 3.5KHz, Shelving)
Switchable Limiter with status light
T5A L
T2A L
Clip Distortion Limiter
Gain Gain
Enhance Enhance
Input Impedance
EQ
D.I.
Tuner Out
FX Loop
Ex. Loudspeaker Socket
Aux In
450W
300W
15” Custom Designed Driver + Switchable
HF Horn
Normal & Hi Inputs
Switchable compres sor with Activity Light
Bass (±12dB at 40Hz, Shelving)
7 Band Graphic (±15dB at 40,
80,160,400,800,2K,6K Peaking)
Treble (±15dB at 3.5KHz, Shelving)
Yes , Balanced XLR
Yes - (0dBu Nominal) (Series-Insert)
(8 Ohms minimum, internal speak er
remains connected)
Mains Fuse:
Power Consumption
Output Power Rating
Loudspeaker
Bass (±12dB at 40Hz, Shelving)
7 Band Graphic (±15dB at 40,
80,160,400,800,2K,6K Peak ing)
(8 Ohms minimum, internal speaker
remains connected)