Laney LR20 User Manual

Page 17

DEL FX: Activate by pressing the ON button. The first section of the rotary control adjusts the
length of Delay applied to the signal, the LED will flash according to the delay time. The second half of
the control adjusts the length of Reverb applied to the signal from Room to Cathedral. These settings
can be applied individually to CH1 and CH2.

The really important thing is to experiment with the EQ and FX controls, because they effect each amp
model in a different way.
The cool sounds you discover can be noted in the user settings section. (Page 21/22)

FOOTSWITCHES: The rear panel has jack connectors for two
footswitches.

CHANNEL: Use a single switch (Mono Jack) footswitch (Laney FS1
Recommended) to switch between channels.
EFFECTS: Use a double switch (Stereo Jack) footswitch (Laney FS2
Recommended) to switch:
(1) MOD FX ON/OFF & (2) DEL FX ON/OFF

HEADPHONE/RECORD OUT: A rear panel 6.35” stereo jack is provided for headphone use.
This output may also be used to connect to a mixing desk for recording if required.

(The internal speaker is automatically disconnected when using phones.
If your Phones have a 3.5mm jack an adaptor will be required)

TIP

This manual is related to the following products:

LR35