iSys iTerra TL1290 Color LED Printer - Manual (Page 24)

22
Maintenance
Cleaning the LED Heads
Clean the LED heads:
• Any time you replace a toner cartridge
• If printing is showing signs of faded images, white stripes or blurred letters
STEP 1
STEP 2
Open the top cover.
Use the LED cleaner provided with the toner cartridges
or a soft, lint-free cloth to gently wipe each of the four
heads (1). Move the cleaner as shown, using a fresh
section for each pass. Be careful not to damage the
guards (2). When finished, close the top cover.
Cleaning the Paper Tray Feed Rollers
STEP 1 STEP 2
Remove items such as wrist watches or bracelets so
they do not catch in the mechanism.
If a hard disk drive is installed in the printer , press and
hold the Shutdown/Reset button on the control panel
for 3 seconds and wait for the display to tell you it is
okay to turn off the printer. Otherwise go to the next
step.
STEP 3
STEP 4
Turn the printer off.
Open Tray 1 side cover and pull out the paper guide
plate.
STEP 5
STEP 6