Yaskawa J1000 Option Potentiometer - Manual (Page 12)

5 Installation Procedure
YASKAWA ELECTRIC TOBPC73060034A Potentiometer Technical Manual 13
◆
Attaching the Option
1.
Insert a flat-blade screwdriver into the
opening as shown in the diagram below to
remove the option cover from the drive.
2.
Insert the connector on the back of the
option into the CN5 port on the drive, and
click it into place.
NOTICE: Damage to equipment. Make necessary parameter
adjustments after installing the Potentiometer Option. Failing
to follow these installation instructions may damage the
drive.
Connection tabs
Tab
CN5 port
Flat-blade
screwdriver