Yaskawa RS-232C Interface - Manual (Page 16)

5 Installation Procedure
16 YASKAWA ELECTRIC TOBPC73060032A RS-232C Interface Technical Manual
◆
Attaching the Option Interface
1.
Insert a flat-blade screwdriver into the
opening as shown in the diagram below to
remove the option cover from the drive.
2.
Insert the connector on the back of the
interface into the CN5 port on the drive so
that it clicks into place.
Note: The RS-232C Interface (SI-232/J) has three
additional connection tabs that must also
click into place to properly mount the
option.
Tab
CN5 port
flat-blade
screwdriver
Tab ab Tab