Elmo RSU-200 - Manual (Page 2)

DIP SWITCH SETTING
Be sure to turn ON No.1 of the DIP Switch(4) on the bottom of the Camera
before turning ON the power supply to the Camera.
CONNECTION
OPERATION
The infrared emitting window of the wireless remote controller is requested to point
at the Infared Sensor of RSU-200 whenever the controller is in use.
When the unit recieves the IR signal, the LED of RSU-200 lights up.
Note:
* It is not possible to control the "POWER" button of the wireless remote controller.
*It is not recommended to use ID number setting by wireless remote controller,
when external control (RS-485) is activated.
use of the RSU-200
AC Adaptrer
PC
BNC Video Cable
RCA Video Cable
(supplied)
BNC/RCA
Conversion
Plug
PTC-200C
PTC-100/PTC-110R
Monitor
RSU-200
(supplied)
Switch
( )
( )
DIP Switch(4) of the Camera