Wiring, 1 terminal position, 1 dc input enclosure – Yaskawa Varispeed-656 DC5 System Regen Converter User Manual

Page 15: Å° 400v-class/200kw, 575v-class/300kw, Figure 4.1, Terminal position, Dc input enclosure

VS-656DC5 Enclosure Installation Manual

13 - 23

4. Wiring

Connect the cabling to the enclosure while referencing the wiring connection diagram pro-
vided by Yaskawa. Enclosure inputs and outputs may be led-in by relaying the cables through
the I/O terminal block.

4.1 Terminal Position

4.1.1

DC Input Enclosure

■

■ 400V-Class/200kW, 575V-Class/300kW

• Install this unit after verifying that the input power is OFF. Failure to do so

may lead to electric shock or fire.

• Wiring should be performed by a skilled electrician. Failure to do so may lead

to electric shock or fire.

• Be sure to ground the grounding terminal. Failure to do so may lead to electric

shock or fire.

WARNING

Output Side
(Main Circuit)

Convertor Module

1TB (Control Circuit Terminal Block)

2TB (General Terminal Block)

Cabling

(Control Circuit)

Cabling Input
(Main Circuit)

Figure 4.1