English, Instructions for use, How to use – Eureka serias 940 User Manual
Page 12
ENGLISH
Caution: Risk of Injury. Do not use Dust container
handle to carry cleaner.
INSTRUCTIONS FOR USE
•
Do not operate without the filters in place.
•
Pull all of the power supply cord out from back of cleaner and plug
into electrical outlet.
Note: When pulling on power supply cord watch for a yellow line on
the cord. Then continue slowly pulling on cord till you see the red
line, stop. The red line indicates the end of usable cord.
•
Turn the ON/OFF button to switch the cleaner on. (I) is ON/ (O) is
OFF.
•
To rewind the power cord, press the rewind button with foot and
guide the cord with hand to ensure that it does not whip causing
damage.
•
By moving the suction control dial, the suction power can be ad-
justed.
•
Suction can also be regulated on the hose handle by opening / clos-
ing the button. (2)
HOW TO USE
Floors should be cleaned regularly over heavily traveled areas, and once
a week over the entire area. Vacuum slowly, making several passes (for-
ward and backward), covering small areas at a time. The time required to
clean will depend on several factors - including type of floor and amount
of dirt.
CLEANING TOOLS
1
Combination Floor Turbo Nozzle: For carpets or hard surface
floors.
2
Hose Suction Control Button: For use to increase or decrease
suction when using cleaning tools.
3
Hard Floor Nozzle*: For any type of hard surface floor.
4
Combo Brush*: (stored on tool clip on wand): For curtains, draper-
ies, cushions, fabrics.
5
Turbo Brush*: For upholstery and for stairs.
6
Crevice Nozzle*: (stored on tool clip on wand): For crevices,
corners, baseboards, between cushions.
7
Tool Caddy*: To store cleaning tools. Clips on wand.
* Depending on model
1.
Dust Container
Handle
Carrying
Handle
2.
3.*
5.*
6.*
7.
4.*
*
Hose Suction
Control Button
!
12