Yaskawa AC Servo Drives Sigma II Series DeviceNet - Manual (Page 9)

E-6
„ INSPECTION AND MAINTENANCE
(Ref.No.)
• Be sure to turn OFF power before inspection or maintenance.
Otherwise, electric shock may result.
E-27
• Never open the terminal cover while power is ON, and never turn ON power when
the terminal cover is open.
Otherwise, electric shock may result.
E-27
• After turning OFF power, wait at least five minutes before servicing the product.
Otherwise, residual electric charges may result in electric shock.
E-27
(Ref.No.)
• Never change wiring while power is ON.
Failure to observe this caution may result in electric shock or personal injury.
E-27
WARNING
CAUTION
Note the following to ensure safe application.
• Some drawings in this manual are shown with the protective cover or shields removed, in order
to describe the detail with more clarity. Make sure all covers and shields are replaced before
operating this product.
• Some drawings in this manual are shown as typical example and may differ from the shipped
product.
• This manual may be modified when necessary because of improvement of the product, modifi-
cation or changes in specifications.
Such modification is made as a revision by renewing the manual No.
• To order a copy of this manual, if your copy has been damaged or lost, contact your
YASKAWA representative listed on the last page stating the manual No. on the front cover.
• YASKAWA is not responsible for accidents or damages due to any modification of the product
made by the user since that will void our guarantee.