EverFocus ENVS800 EN - Manual (Page 112)

Device Name
Tested
Firmware Video
Format Video
Ch Max
Resolution
Audio
I/O
Ch
PTZ
On-Edge
Motion
UPnP Remarks
VISION i series
IP VISION
1.1.0.13
20111122
MJPEG
H264
1 720x480 2-way 1/1 - - -
Note:
Vision Mi series
IP VISION
1.1.0.13
20111122
MJPEG
H264
1 1280x720 2-way 1/1 - - -
VISION M3i
series
IP VISION
1.1.0.13
20111201
MJPEG
H264
1 1920x1080 - 1/0 - - -
Note:
VISION NVS102
IP VISION
1.1.0.13
20111201
MJPEG
H264
1 720x480 2-way 1/1 Yes - -
Note:
Vision Hi-Tech
- : not avaliable on camera
*1: not avaliable on software
VISION M3i : Real max resolution of M3i is 1920x1088.
VISION NVS102:
Support both of NTSC/PAL, but can be switched only on camera web.
Need to reboot camera after switched NTSC/PAL, then MainConsole will detect correct responding resolution.
The value of PTZ speed control won’t sync with camera web setting if it is saved in Main Console.
PTZ speed : pan setting = tilt setting. Change one of pan or tilt, and then the other will change, too.
VISION i Camera : Sometimes audio from machine would fail, but there is chance to recover after reboot.
(Hardware issue)
IP Supported Camera List
Updated 7-25-2012