Emerson MW8103SS - Manual (Page 8)

8
Operation Guide
Turning on the Power and Selecting a
Weight
The first time you plug the power cord into an
outlet, or after there has been an interruption in
power, the display shows “
” At this
point, you can select the weight system for the
display. You can choose between pounds (LBS)
or kilograms (KG). To do so,
1
Press “0” immediately after plugging in your
microwave. The display will show:
If the display does not shows “Kg”, you will
need to unplug the microwave and then
plug it in again in order to change to the
weight selection.
2
Press “0” repeatedly to select the weight
system you wish to use:
When you have selected the weight system
you want to use, press the PAUSE/CANCEL
button to end this procedure.
Setting the Clock
1
Press the Clock button. The “ENTER” and
“TIME” indicators flash.
2
Use the Number buttons to enter the
current time. You must press at least three
numbers to set the clock. If the current time
is 5:00 enter, 5,0,0.:
3
When 5 seconds has elapsed, “Cloc” will
be displayed.
4
Press Clock again. A colon will appear,
indicating that the time is set.
If there is a power interruption, you will
need to reset the clock.
You can check the current time while
cooking is in progress by pressing the
Clock button.
Using the Pause/Cancel Button
The Pause/Cancel button allows you to clear
instructions you have entered. It also allows you
to pause the oven’s cooking cycle so that you can
check the food.
•
To pause the oven during cooking, press
Pause/Cancel once. To restart, press Start.
• To stop cooking, erase instructions, and
return the oven display to the time of day:
press Pause/Cancel twice.
• To correct a mistake you have just entered,
press Pause/Cancel once, then re-enter the
instructions.
kg g oz Lbs cup .
START ENTER COOK TIME TIME2
Kg g Oz Lbs. QTY.
START ENTER COOK TIME TIME2
Kg g Oz Lbs. QTY.
START ENTER COOK TIME TIME2
Kg g Oz Lbs. QTY.
БВГДЕЖЗЗИЙБГБ !"#$%&'ЖЕ"(ЕЕД)01)Б