Programmed playback – Emerson Radio PD1710 User Manual

Page 13

1 2

PROGRAMMED PLAYBACK

You can program up to 20 tracks on a disc to playback in any desired order. You

may also program a specific track to play several times within the same program.

Note: The player cannot be programmed while a disc is playing. If a disc is playing

press the STOP

button to stop playback before you begin the programming

steps below.

1.) Move the FUNCTION selector to CD, insert your disc in the player, close the

door, and wait until the total track number appears in the display.

2.) Press the PROG. button once. The PROG. Indicator and

program memory “0” begin flashing in the display.

3.) Use the

buttons to select the first track to be

programmed. (Example: Track 8).

4.) When track number “8” flashes in the display, press the

PROG. button once again to enter the track “8” in program

memory number “01”. Track number “8” disappears and

“0” flashes again in the display, indicating that you may

now select a track to be entered in program memory

number “02”.

5.) Use the

buttons to select the next track to be programmed. When

the desired track number appears in the display press the PROG. button again

to enter that track in the program memory.

6.) Repeat Step 5 until you have entered up to 20 tracks

in the program memory. When the memory is full, the

“– –” and PROG. indicator flash.

PROG.

PD1710_010504.p65

5/1/2004, 15:55